• Components compatible with single color LED strips and modules
• Supports multi-receiver, multi-remote configurations
• RF technology (916 MHz) eliminate the need for direct line of sight between receiver and wireless remote
• Multiple receivers may be programmed to be controlled by a single  remote
• Multiple receivers may be programmed to operate in sync, without the need to be physically linked together with wires

Description

These components work together seamlessly, providing a flexible and scalable solution for single color LED strips and modules.

Components sold separately.

======   Receiver/Dimmer (3351DM)   ======

• Support for single color LED strips/modules
• Support for 12V, 24V, and 36V components
• RF technology (916 MHz) eliminate the need for direct line of sight between receiver and remote
• Multiple receivers may be programmed to be operated by a single remote
• High capacity 8A per channel

Description (receiver/dimmer)

This 1-channel RF dimmer/receiver forms the basis of a flexible system for single color LED strips/modules.  With a capacity of 8A, this controller can drive a significant load.  When a project calls for more LED strips/modules than a single dimmer/receiver can handle, additional units may be added.

A companion remote control (required, sold separately) would be 3352RMT-R1.  In addition to the ability of having a single remote controlling multiple receivers, each dimmer/receiver may also be controlled by up to 8 remotes.

Note:

The terminals for "Push Switch" is for connecting to an optional momentary switch (sold separately), and can be left unconnected when the mini wireless remote (3352RMT), wall-mount rotary remote (3356WS), or surface-mount remote (3371RMT) is used.

Specifications (receiver/dimmer)

======   Mini Button Remote (3352RMT)   ======

• Turns lights On/Off and adjusts brightness remotely
• Small size and uses a single button for easy operation
• Communicates via RF (916 MHz) signals that penetrate most obstacles
• Supports control of multiple dimmers/receivers via a single remote
• Holder may be permanently mounted or magnetically attaches to many metal surface

Description (mini button remote)

This single color wireless RF remote is a great companion for the 3351DM-R1 dimmer/receiver.  It is small in size, and very easy to use with a single button design.

A holder for the wireless remote is included.

Note

• Detach remote from its holder (by pulling straight out), and remove plastic tab from battery compartment before use.
• Press power button to turn On/Off.
• Press and hold power button to adjust brightness.

Programming Dimmer/Receiver (sold separately):

To pair/learn:

• Power up the dimmer/receiver.
• Press "Learning" button on dimmer/receiver.
• Press power button on remote; connected LED light flashes to indicate success.

To unpair/unlearn:

• Press and hold "Learning" button on dimmer/receiver for more than 5 seconds until connected LED light flashes.

Specifications (mini button remote)

======   Surface-Mount Remote (3371RMT)   ======

• 5-button design for reliable on/off and dimming function
• Battery-operated and surface-mount for easy installation (no wiring and electrical box necessary)
• Remote may be detached to become handheld
• Smooth dimming range of 1-100%, with wireless control range of up to 60 feet
• Scalable for small and large projects -- supports multiple receivers in a single zone

Description (surface-mount remote)

This single color, surface-mount RF dimmer remote is a great companion for the 3351DM-R1 receiver.  Being surface-mount, it will always be reliably found at the same, familiar location, with the flexibility of becoming handheld when so desired.  And being battery-operated, wiring is not required. Multiple receivers may be programmed to be operated by a single remote, great for projects that have separate areas of lighting to be operated in sync.

Note: Remove plastic tab from battery compartment before use:

• Detach remote from back plate (held together by magnet).
• Remove battery compartment door from back of remote.
• Remove plastic tab.

Programming Controller/Receiver (sold separately)

To pair/learn:

• Power up the controller/receiver and remote control.
• Press "Learning" button on controller/receiver.
• Press the up or down arrow button on remote; connected LED light flashes to indicate success.

To unpair/unlearn:

• Press and hold "Learning" button on controller/receiver for more than 5 seconds until connected LED light flashes.

Specifications* (surface-mount remote)

* Specifications are preliminary.