• Outputs RGB color-changing as well as dedicated 3000K warm-white light
• Advanced COB design coupled with high LED density for uniform glow without distinct hot spots
• 180-degree wide beam angle, super bright and energy efficient, operate on 24 VDC
• Cuttable at designated cut marks (approx. every 2.5”) to suit various length requirements; cut sections may be linked by directly soldering wires
• Adhesive back for easy installation on dry, flat, smooth, non-porous surfaces

Description

This high quality, 24-volt, flexible LED strip utilizes RGB as well as dedicated warm-white LEDs for vibrant colors and crisp, inviting warm-white light.  It features COB design with a high LED density, especially suited for applications that call for uniform glow throughout the length of the LED strip, without any distinct hot spots.

Note

• Must be used with compatible power supply and RGBW controller.
• Minimum bending radius is 5 cm (2").
• Unused wires of LED strip must be isolated to prevent potential short circuit.
• Unroll LED strip completely before powering on.
• Test all components before cutting or permanently mounting the strip.
• Do not lengthen LED strip by directly connecting additional strips to it; additional lengths should be wired in parallel (controller and power supply must be of adequate capacity).
• Specs based on factory testing of 1m lengths; voltage drop is greater on 12V strips than their respective 24V versions.
• For best results, power LED strip from both ends whenever possible.
• Due to its high power, it is strongly recommended to mount LED strip on aluminum channels to facilitate proper heat dissipation.

Specifications (LED strip)