RGB Color Changing Kit 16.4 ft / 5 M Flexible LED SMD5050 Ribbon White Background

Product Information

Product Description

• 16 colors, 5 light pattern: Static/Flash/Strobe/Fade-change/RGB Smooth-change.
• 16-classes Static Mode Dim Control:
• 16-Speeds Control in Flash / Strobe / Fade-change / RGB Smooth-change.
• 6 DIY keys for programming custom R/G/B color.

Wiring

• Unroll LED strip completely.
• The other end of the LED strip has wires that must be isolated – use electrical tape to wrap each wire end.
• Connect the 4 pin controller to the LED strip making sure the arrows on the connectors match.
  
• Connect 5mm jack of power supply to INPUT port of controller.
• Remove the plastic seal in the battery compartment of the wireless remote.
  
• Double check that all connections are correct and secure, then plug in power cord.

Special Notes

• Test all components before permanent installation.
• Make sure that wires at the other end of the LED strip are not touching one another (or any metal object), which would create a short circuit.  Electrical tape may be used to wrap each of those wire ends to isolate them.
• Do not lengthen the LED strip by connecting an additional section to it.
• Once LED strip is cut or adhesive is applied, items cannot be returned.
  

Price: $65.00 $45.00

• Tell a Friend